Your concern might be complex to diagnose and may require additional equipment to pinpoint the cause. In this case, you'll receive Digital Inspection results plus a quote to perform deeper diagnostic/test procedures.
Select your make
Additional information
No models
Odo of your car
Select shop
Select your issues
Select preferred date
What do you prefer?
Your preferred contact Info
Find Professional HelpTo select the best-suited Professional for your vehicle make, please select your vehicle brand and your location
If your brake system is acting differently, you might want to understand what problems might be developing. Check this list for a brake symptom similar to yours.
Cause: Worn-out brake pads often produce a high-pitched squeal, thanks to a built-in wear indicator that alerts you it's time for a replacement.
Grinding Sound When Braking
Cause: If the brake pads are completely worn down, the metal backing plate can scrape against the rotor, causing a harsh grinding noise and potential rotor damage.
Spongy or Soft Brake Pedal
Cause: Air in the brake lines, old or contaminated brake fluid, or a failing master cylinder can make the pedal feel soft or require more effort to stop.
Vehicle Pulling to One Side
Cause: Uneven wear on brake pads, a stuck caliper, or a brake fluid imbalance can cause the car to veer to one side when braking.
Vibration or Pulsation in the Brake Pedal
Cause: Warped rotors, caused by excessive heat or improper installation, can lead to vibrations when braking, much like a washing machine on an uneven spin cycle.
Cause: This can signal low brake fluid, worn brake pads, or a problem with the brake system, such as the ABS module.
Increased Stopping Distance
Cause: Worn pads, glazed rotors, or low brake fluid can reduce braking efficiency, making it take longer to stop the vehicle.
Brake Fluid Leaks
Cause: Damaged brake lines, a leaking master cylinder, or loose fittings can cause brake fluid to pool under the car or result in reduced hydraulic pressure.
Brake Pedal Feels Hard
Cause: A failing brake booster or vacuum leak can make the brake pedal difficult to press, requiring much more effort to slow down or stop the vehicle.
