Riverside Automotive Repair
4.8
Good StandingSa 7:30 AM – 12:00 PM
Su Closed
Do you plan to take your vehicle to a place like St. George, UT with prolonged heat/cold or humidity in the next 3 months? Please consider the following impact on your vehicle:
Heat is generated very quickly due to the friction between the brake pads and the brake rotors, so the brake system will remain warm long after the vehicle has been parked in St. George, UT . Heavy braking can overheat the brakes, leading you to experience brake fade that reduces the efficiency of the brakes and lengthens the distance your vehicle comes to a complete halt. When engine oil is thinner due to heat, there is increased risk of leaks occurring. Additionally, higher temperatures as in{' '} St. George, UT can lead to insufficient lubrication, resulting in sludge formation. oil flow might be lowered and can impede your vehicle's overall performance.
Any or all of the following fixes might be proposed by your shop in St. George, UT to restore your brake system to operate as designed and meet safety standards. THESE FIXES are offered by all shops IN the neighborhoods
If your brake system is acting differently, you might want to understand what problems might be developing. Check this list for a brake symptom similar to yours.
Cause: Worn-out brake pads often produce a high-pitched squeal, thanks to a built-in wear indicator that alerts you it's time for a replacement.
Grinding Sound When Braking
Cause: If the brake pads are completely worn down, the metal backing plate can scrape against the rotor, causing a harsh grinding noise and potential rotor damage.
Spongy or Soft Brake Pedal
Cause: Air in the brake lines, old or contaminated brake fluid, or a failing master cylinder can make the pedal feel soft or require more effort to stop.
Vehicle Pulling to One Side
Cause: Uneven wear on brake pads, a stuck caliper, or a brake fluid imbalance can cause the car to veer to one side when braking.
Vibration or Pulsation in the Brake Pedal
Cause: Warped rotors, caused by excessive heat or improper installation, can lead to vibrations when braking, much like a washing machine on an uneven spin cycle.
Cause: Overheated brakes, often from prolonged downhill braking or "riding" the brakes, can produce a sharp, chemical-like burning odor.
Cause: This can signal low brake fluid, worn brake pads, or a problem with the brake system, such as the ABS module.
Increased Stopping Distance
Cause: Worn pads, glazed rotors, or low brake fluid can reduce braking efficiency, making it take longer to stop the vehicle.
Brake Fluid Leaks
Cause: Damaged brake lines, a leaking master cylinder, or loose fittings can cause brake fluid to pool under the car or result in reduced hydraulic pressure.
Brake Pedal Feels Hard
Cause: A failing brake booster or vacuum leak can make the brake pedal difficult to press, requiring much more effort to slow down or stop the vehicle.